1 Open the lid and use a screwdriver to pry off the lower bayonet of the paint bucket lid. Just open half of it, don't open it all. 2. Open the lid by 45 degrees. The lower half of the lid has a rubber gasket for sealing. Do not break it. This is the key to ensuring the sealing. The better the sealing, the longer the storage time. 3 Use, after opening the lid, you can use the paint normally.
Kutu kapağı kullanıldığında hava sızdırmazlığını etkilememek için, kullanırken lastik tamponun boyayı almamasına dikkat edin.
4. To close the lid , first put the rubber pad under the lid of the paint bucket , and then close the lid. When closing the lid, make sure that the rubber pad is sandwiched between the lid and the mouth of the bucket, and do not let the plastic pad fall into the paint bucket. After closing, press the bayonet down firmly to fasten it. It doesn't have to be too tight, just snap it on. Matters needing attention 1. The plastic pad inside the cover is the key to ensure air tightness. Be careful not to break the cover when opening the cover.
2. Kapak kapatıldığında, plastik pedin boya kovasına düşmesi çok kolaydır. Plastik tampon namlunun ağzına sıkıca oturduktan sonra kapağı kapattığınızdan emin olun.
https://www.fhpails.com/
